DM-102 is portable meter with rechargeable battery. Because the meter is versatile, it fits into many different measurement needs. It suits into use of for example industrial and laboratories. Meter also suits for initalization-, conditions-,maintenance- and process-measurements.
Look also GD10-L
The DP-101 panel meter is a 4-digit programmable meter intended for measurement of temperature, pressure, humidity, flow rate, level, concentration and other analogue units.
The meter is delivered pre-programmed for the specified input .On separate order the meter may also be delivered with 2 adjustable alarm limits, a 4-20 mA current output, and/or for use with a 24 VDC supply.
Read more:DP-101 Digital panel meter
The DP-151 is a programmable meter intended for measurement of temperatures using resistance sensors and thermocouples as well as other analogue units such as voltage, current, and resistance. It can be programmed to give linear and non-linear response of displayed values. On separate order the DP-151 may also be obtained in models that allow control and counting operation.
Read More: DP-151
The DP-151-B panel meter is intended for use in resistance bridge measurements (extension, load weight etc.), it can be programmed to give linear and non-linear display of range settings.
Two adjustable alarm limits are standard in the meter and direction of operation, hysteresis, and delay may be programmed. Alarm limits provide contact closure relay control (opening contacts on separate order). The meter may also be obtained with two additional alarm limits, transistor outputs, and analogue (4-20 mA) output.
The DP-152 two channel panel meter is intended for temperature measurements with thermocouples or with resistance thermometers as well as other measurements with analogue units; voltage, current, and resistance inputs. It can be programmed to display results in linear or non-linear form. It is also possible to measure the difference between channels and display the mean value, and to scale the measurement ranges differently, linearly or non-linearly. The meter includes two adjustable alarm limits as standard and the direction of operation, hysteresis, and delay may be set. Alarm limits also provide relay contact closure control (on special order contact opening). The meter is also available with two additional adjustable alarm limits with transistor controlled output.
The DP-153 panel meter is intended for temperature measurements using Pt-100 ohm resistance sensors (2 or 3 wire system) or 0-1 V voltage measurements.As standard the meter has two adjustable alarm limits with direction of operation, hysteresis, and delay settings. The alarm limits give relay contact closure control (opening contacts to separate order). Alarm limits are for all channels combined, so that whichever channel exceeds the limit, the alarm relay will be activated. The alarm relay output is cancelled when the measured value on all channels has returned to the normal range.
Read more:DP-153 3 channel panel meter
The LDP-151/152 panel meters are 1 or 2 channel large display units intended for temperature measurements with thermocouples or resistance sensors as well as voltage, current, and resistance measurements.Panel meters can be programmed to give linear or non-linear display within the range set.
Read more: LARGE DISPLAYS
The DP-301 panel meter is a display unit intended for usage in transferring bit mode measurements and control messages in industrial process control
In addition to the digital display, the meter has 4 alarm indicator lights and possible use of a buzzer. It also checks its own/line operation showing the “Err” warning light as an indication of operation disturbance. There are 2 different relay contact outputs available for the alarm limits and error operation.
Read more: DP-301 digital serial bus display
DP-302 panel meter is a display unit intended for transferring bit mode measurements and control messages in industrial process control applications. In addition to the column display, the meter has 4 alarm indicator lights with the possible use of a buzzer. Transmitter also checks its own/line operation and shows the “Err” warning light if there is an indication of operation disturbance.
Read more: DP-302 Digital serial bus display
DP-101/102S local display units are designed to measure temperature, humidity, pressure differences, level, air flow speed, volume of the air and other variables. Meters will work through alarms and message transfer activities. They are surface-mounted.
Read more: DP-101_102S Local display units